Cutting Tips for The Average Joe

What You Stand to Gain By Using Waterjet Cutting for Materials

Waterjet cutting is one of the methods applied for cutting of metal and other substances in an industrial setup. A water jet at very high pressure is normally used, sometimes in combination with either an oxy-fuel flame or plasma to do the cutting. The waterjet machine cuts with a high degree of accuracy and this produces a very clean cut. And the fact that waterjet cutting causes very little wastage of the materials means that it is ideal for working on materials that are quite costly and rare. Industries that need to cut through metals and other hard materials to manufacture and fashion products normally use waterjet cutting. This cutting method has numerous advantages over other traditional cutting methods. Below are outlined some advantages of waterjet cutting.

When cutting using a waterjet machine, there is no heat evolved. Heat is normally produced when other ways of cutting material are used. The cutting is done at very high temperatures that are capable of melting even metal. Heat may destroy the material being worked on if the material cannot withstand high temperatures. These delicate materials can easily be damaged by the heat, meaning that you cannot use them anymore. Pressure, rather than heat, is the principle on which waterjet cutting operates, meaning it can be applied to such materials.

When cutting with a waterjet machine, little raw material is wasted because of the high accuracy involved. That’s why waterjet cutting is referred to as a precision cutting method. The method can make cuts as narrow as under a millimeter thick. As compared to other methods of cutting, very little of the material is treated as waste after cutting. The level of precision involved can even be improved more by the use of highly advanced computer technology.

Waterjet cutting is applicable for cutting all kinds of material. Laser and plasma cutting, as well as use of oxy-fuel flame normally involve lots of heat Because of this, they cannot be used on materials that are either soft or fragile. On the contrary, waterjet cutting is applicable to all materials, thereby making it quite multipurpose.

Moreover, when you use a waterjet machine to cut through material, there’s very little debris left on the cut surface. Other means of cutting sometimes leave the cut surface warped and deformed such that I needs to be smoothed through grinding of using a sand paper. Conversely, surfaces cut with a waterjet machine hardly need any extra finishing due to the fact that they are normally as clean as they can get. This makes it easier to work with the material, which in turn translates to less labor required to carry out the tasks.

5 Takeaways That I Learned About Equipment

Overwhelmed by the Complexity of Equipment? This May Help